Install the system components on the servers that meet the following hardware requirements.
Asset count | CPU, cores | RAM, GB | Free disk space | ||
---|---|---|---|---|---|
For scanning once a week | For scanning once in 2 weeks | For scanning once a month | |||
Up to 1,000 | 12 | 64 GB | 450 GB | 300 GB | 250 GB |
Up to 5,000 | 14 | 64 GB | 1.8 TB | 1.1 TB | 650 GB |
Up to 10,000 | 18 | 64 GB | 3 TB | 1.7 TB | 1.1 TB |
Up to 20,000 | 24 | 80 GB | 5.9 TB | 3.3 TB | 2 TB |
Up to 50,000 | 24 | 90 GB | 6.5 TB | 4.1 TB | 3 TB |
Up to 100,000 | 32 | 100 GB | 11.8 TB | 7.5 TB | 5.3 TB |
It is recommended to use processors with Hyper-Threading—for example, Intel Xeon Scalable second generation or later processors (or similar) with a 2.2 GHz minimum clock rate.
It is recommended to use a network adapter with a speed of at least 1 Gbps.
To store data, you must use SSDs combined into a fault-tolerant RAID array with the ext4 file system (with a 4,096-byte block size).
For the OS to run, it is recommended to create a 200 GB partition on the disk and mount it as the /
directory. To store data, it is recommended to create a partition not less than that specified in the table above and mount it as the /var
directory.
It is recommended to use swap space of at least 10% of total RAM.
Minimum requirements for asset scanning by the Audit and Pentest modules | |||
---|---|---|---|
Up to 4 threads per a collector | Up to 10 threads per a collector | Up to 20 threads per a collector | |
Number of logical cores in the | 4 | 6 | 8 |
RAM | 4 GB | 8 GB | 12 GB |
300 GB | 300 GB | 300 GB |
Server component | Minimum requirement |
---|---|
CPU | 2.2 GHz clock speed, 4 logical cores in total |
RAM | 4 GB |
Network adapter | 1 port (1 Gbps) |
Hard disks | 300 GB |
Asset count | CPU, cores | RAM, GB | Free disk space | ||
---|---|---|---|---|---|
For scanning once a week | For scanning once in 2 weeks | For scanning once a month | |||
Up to 1,000 | 12 | 64 GB | 450 GB | 300 GB | 250 GB |